KTM 690 Enduro R USB GPS power plug installation

This is my third bike I've installed the  USB power plug. It has always performed flawlessly. I opted for a Burnsmoto USB socket because it takes less space than a bulky cigarette lighter type plug AND most devices I use (GoPro cameras, GPS navigators, phones etc.) can be charged via USB. I can also use the same compact charging cable for many devices and storage it under the seat.

The 690 Enduro R has a cable for powering various devices ready and hidden behind the headlight. It us just a matter of unscrewing the two bolts on the sides of the headlight and digging the ends out. The one I used was marked  ACC2 which means it's only hot when the key is turned so there is no chance of a GPS to drain the battery if left on unintentionally. (there is also a an always hot ACC1 plug behind there)

I Shortened the wires of the plug, but left some coiled up behind the headlight in case I needed a few inches of play at some point. I did not bother to fasten the plug end to anything. It stays pretty much put as it is now.

Here is what you are looking for.

You can see the ACC2 marking on the wire

ACC2 wires

Burnsmoto plug

Ram Mount ball for the GPS holder

KTM 690 Enduro R with Bags-Connection / SW-Motech GPS mount